GeoticGraph - Versions history

Mai 13^th, 2009 - 4.2.1

• Correction of minor bugs

April 7^th, 2009 - 4.2.0

• New option to add or not the information tooltips
• The source and destination is linked to the profile instead of the profiles DB
• 5 new symbols for the core angles
• New option to write or not the core angle text
• The available surface and the custom paper are calculated correctly according to margins

February 27^th, 2009 - 4.1.3

• A separator "/" can be addedd in the list of elements in the assay profiles
• The assay and zone texts are spaced by 2/3 of the height

February 18^th, 2009 - 4.1.2

• New "Copy" button in codes and profiles
• The assay and zone texts are written if one of the elements is in the interval to write
• The bloc entities are created on the layer "0"
• The azimuths of holes with down hole surveys at 0 are interpolated correctly

January 30^th, 2009 - 4.1.1

• The symbol of intersection with the section is drawn correcly
• The azimuths of coordinates systems can have up to 8 decimals
• The creation speed is improved (de 75%)
• Better memory management

January 16^th, 2009 - 4.1.0

• New option to write the text horizontally in the zone profiles
• New interface for the selection of the calculation type for planned holes
• Position the section works correctly
• The grid Height of Plot in the plan projection in NegX view is correct
• The creation speed is improved (of 40%)
• Possibility to enter the colors of type "True color" with the RGB values

December 17^th, 2008 - 4.0.4

• The DDHs are selected at the section creation even if Source and Destination is closed
• Better management of the "TAB" key
• ByLayer, ByBlock, and BackGround can be selected as color

December 11^th, 2008 - 4.0.3

• The hole name at the end takes the good azimuth
• Zone texts are displayed correctly
• Bar graphs are drawn where they should
• Projection grids are drawn correctly
• Correction of minor bugs

December 2^nd, 2008 - 4.0.2

• DDHs are drawn with the good azimuth
• Grids are drawn on different layers
• Reads the new geophysics file format (.gph)
• Correction of minor bugs

November 24 ^th, 2008 - 4.0.1

• Zone texts are displayed
• Correction of minor bugs

November 21 ^st, 2008 - 4.0.0

• New functionalities for hole planifications
• New functionalities for the calculation and exportation of coordinates along the DDHs
• New functionalities for positioning of the view
• New hole name orientation: horizontal and vertical
• The grid lines can be of either type
• The structure trace can be in color
• The assay texts can be colored according to each assay title
• Informations included in the trace under the form of tooltips
• Possibility of defining the tracing order of the levels
• Possibility to have the sizes in absolute and relative units
• Possibility to ignore the 0 in the geophysics graphs
• Possibility to have a superior limit (capping) for the assay graphs
• Possibility to make geophysics graphs with a logarithmic scale
• Possibility to have delimitors (limits extension) to the traces extrimity
• Selection of the delimitor for the coordinates exportations
• The azimut and the average combined factor of the World system can be changed

July 8^th, 2008 - 3.2.3

• Possibility to use a securized source database
• Correction of minor bugs

May 12^th, 2008 - 3.2.2

• New option for each level to have its own width
• New option for the text of each level to be black or not
• New option for defining the defaut color of assays
• New menu to access the website
• Correction of the grids measure and world in the projection plan of the NegX view
• Correctly selects the copied or renammed task profile

April 15^th, 2008 - 3.2.1

• Correction of the interpolations for the cases where the World units are different than those of intervals
• Correction of the XYZ importations for the cases where the World and Plot units are different

March 19^th, 2008 - 3.2.0

• Reads a 5.2.X GeoticLog database
• Correction of minor bugs

February 28^th, 2008 - 3.1.1

• The copy and addition of task profiles is done correctly

February 13^th, 2008 - 3.1.0

• Possibility to incorporate photos in sections
• The XYZ coordinates can be exported even if the font size is 0

February 7^th, 2008 - 3.0.5

• Improvement of the interpolation of the plunges for big databases

February 1^st, 2008 - 3.0.4

• Correction of the text angle for the holes with an East azimuth

January 25^th, 2008 - 3.0.3

• The sample length in assay profile can be inserted elsewhere than at the start
• N'essaie plus de tracer les colonnes de géophysiques 4 à 6 avec un ficher GDD

January 11^th, 2008 - 3.0.2

• Correction of the authentification of network dongles

December 17^th, 2007 - 3.0.1

• Update of the Spanish interface
• Minor corrections

December 1^st, 2007 - 3.0.0

• Possibility to include curve graphs for geophysics
• Possibility to include barr graphs for assays (regular and geochemical)
• Addition of a legend text column for the creation of legends with GeoticCAD
• Correction of the precision of the limits of the holes on the limits of the sections
• Interface available in Spanish
• Task profiles database interchangable
• Possibility to include information of the entry, exit, and intersection points of sections
• Possibility to add complementary lines in the medium and large title boxes
• The grid coordinates are on the four sides of the drawing
• Uses the registry base for the source and task profiles databases lists and the destination directories

March 20, 2007 - 2.0.8

• Improvement of the graphic quality
• Addition of marker along the drill hole trace
• Correction of the precision while viewing " pos Y "

March 1^st, 2007 - 2.0.7

• Correction of graphic symbols

November 17^th, 2006 - 2.0.6

• Addition of a help file
• Correction of "captions"
• Correction of the text orientation
• Correction of wedges