Description
An Ellipse is defined by a central point (Center), a start angle (StartAngle), a main axis angle
(MajorAngle), the main axis length (MajorLength), the secondary axis length (MinorLength),
and an end angle (EndAngle).
Object
GeoticEllipse
Commands
Ellipse or el
The Ellipse command first asks for an central point, then an the end point of the main axis,
and finally the length of the secondary axis. The angle and the length of the main axis are
calculated from these 2 points. The start and end angle are 0º by default.
Remarks
If an ellipse has a thickness (Thickness), then the extrusion vector (ExtrusionVector) defines
the direction of the thickness.
A kind of arc can be made with an ellipse by changing the start and end angles.
An ellipse is drawn in the plane formed by the central point and the extrusion vector.
An ellipse can have a fill pattern (FillProperties).
Ellipse